TL;DR
Play games on Amazon Luna for your next adventure, included with Prime
- A rotating selection of games, no download needed
- Play on TV, laptop or phone
- Fast, free delivery for your gear, too
An XDA Developers test found Nvidia’s DLSS Frame Generation Preset C increased average performance by 6.1% on an RTX 4070 Ti Super in Cyberpunk 2077. The reviewer reported no readily visible image-quality difference during an hour of gameplay, but said the result applies to one game and test setup; Nvidia’s larger performance claim concerns an RTX 5060 using 6x frame generation.
Nvidia’s DLSS Frame Generation Preset C raised average performance by 6.1% on an RTX 4070 Ti Super in an XDA Developers test of Cyberpunk 2077, offering an early indication of how the new mode works on RTX 40-series cards. The reviewer said the image-quality trade-off Nvidia describes was not apparent during gameplay, though the result comes from one game, one graphics card and a specific test setup.
Preset C is a beta frame-generation mode Nvidia introduced through the Nvidia App on October 13 for RTX 40-series and RTX 50-series graphics cards. According to Nvidia’s description, it replaces the second of the two AI models used in frame generation—the model responsible for optical flow in interface elements and ray-traced effects—with a lighter algorithm. The company says this can improve performance, with some image quality trade-offs.
For the RTX 4070 Ti Super test, XDA’s reviewer ran Cyberpunk 2077 at 1440p, with ray tracing set to Medium and DLSS Super Resolution on Balanced using Transformer Model 2. The remaining settings were maxed out, with Ray Reconstruction and Reflex enabled. Across three runs of the built-in benchmark, the system averaged 99.1 frames per second with frame generation off, 157.6 FPS using Preset B, and 167.2 FPS using Preset C.
The reviewer also reported that the estimated rendering cost of frame generation fell from 20.5% of the card’s frame rate with Preset B to 15.6% with Preset C. Average PC latency measured 36.3 milliseconds with Preset B and 35.5 milliseconds with Preset C, compared with 31.8 milliseconds when frame generation was off. These figures describe the tested configuration, not a general guarantee for other games or systems.
GPU Field Test · DLSS Frame Generation
Nvidia’s New Frame Generation Mode, Measured on RTX 4070 Ti Super
An XDA Developers test found a modest speed boost from DLSS Preset C in Cyberpunk 2077. The reviewer saw no readily visible difference during an hour of play, but one system and one game cannot settle the broader question.
01 / The result
A measurable gain, in a specific test
The comparison is useful for RTX 40-series owners, while remaining a single-game data point rather than a performance guarantee.
Average FPS · Three built-in benchmark runs · Higher is better
02 / Test setup
What the reviewer measured
The settings and hardware define the boundaries of this result.
Cyberpunk 2077 ran at 1440p with Medium ray tracing and DLSS Super Resolution set to Balanced using Transformer Model 2. Other settings were maxed out, with Ray Reconstruction and Reflex enabled. The system paired the RTX 4070 Ti Super with a Ryzen 5 7600X and 32GB of DDR5-6000 memory, using driver 621.01.
Average PC latency measured 36.3 ms with Preset B and 35.5 ms with Preset C. Frame generation off measured 31.8 ms.
03 / How Preset C works
A lighter model in the frame-generation pipeline
Nvidia introduced the beta option for RTX 40- and RTX 50-series GPUs through the Nvidia App.
Preset B · Existing
Quality-oriented mode
Nvidia’s existing frame-generation preset provides the comparison point in the XDA test.
Preset C · Beta
Lighter replacement model
Nvidia says it replaces the second AI model, which handles optical flow in interface elements and ray-traced effects.
Trade-off · Under study
Performance for image quality
The lighter algorithm can improve performance, Nvidia says, with some image-quality trade-offs. Their visibility can vary by scene.
“Preset C runs up to 35% faster on the RTX 5060, with minor image quality trade-offs.”
Nvidia“It wasn’t possible to tell Preset C apart from Preset B in gameplay conditions.”
XDA Developers reviewerText and particles appeared weaker mostly when footage was examined frame by frame.
Digital Foundry, as reported04 / Keep the claims in context
The 35% headline is a different test
Nvidia’s example and XDA’s measurement differ in GPU, frame-generation mode, CPU and settings.
| Measure | Nvidia example | XDA test |
|---|---|---|
| Graphics card | RTX 5060 | RTX 4070 Ti Super |
| Frame-generation mode | Up to 35% claim uses 6x; Nvidia’s chart also showed a smaller 2x gain | 2x mode; Preset C averaged 6.1% above Preset B |
| Processor | Ryzen 7 9800X3D | Ryzen 5 7600X |
| How to read it | 6x generation is exclusive to Blackwell GPUs | One RTX 40-series card and one game |
05 / Evidence limits
What this test can—and cannot—show
One title, one system
The 6.1% gain comes from three Cyberpunk 2077 benchmark runs on one RTX 4070 Ti Super setup. The source does not establish results for other games, CPUs, resolutions or RTX 40-series cards.
Gameplay impressions have limits
The reviewer saw no readily visible difference during about an hour of play. That does not rule out artifacts in other scenes or for other players.
Close inspection can reveal detail
Digital Foundry reportedly observed weaker handling of text and particles on RTX 50-series hardware, mainly frame by frame. How often this appears in routine play remains unclear.
More RTX 40 testing is needed
The available evidence cannot show whether this gain is typical across RTX 40-series models or how visual compromises vary among games.
06 / A practical way to compare
Try it in the games you actually play
Preset C is an option to test. Compare frame rate alongside the details you care about.
Start with a scene you know and settings you normally use.
Check average frame rate under the same resolution and graphics settings.
Pay attention to interface text, particles and ray-traced effects.
Use Preset C if its extra frames help and its image looks right to you.
07 / Key questions
Quick answers
What is DLSS Frame Generation Preset C?
A beta mode available through the Nvidia App for RTX 40- and RTX 50-series GPUs. Nvidia says it swaps one AI model for a lighter algorithm to improve performance, with image-quality trade-offs.
How much faster was it on the RTX 4070 Ti Super?
In XDA’s three-run Cyberpunk 2077 test, average performance rose from 157.6 FPS with Preset B to 167.2 FPS with Preset C, a 6.1% increase.
Does Nvidia’s 35% claim apply to RTX 40 cards?
No. The up-to-35% example concerns an RTX 5060 using 6x frame generation, a mode exclusive to Blackwell GPUs. It is not a measured RTX 40-series result.
Did the test find a visible image-quality difference?
The reviewer could not distinguish Preset C from Preset B during about an hour of gameplay. Nvidia describes quality trade-offs, and reported close inspection has found text and particle differences.
What Preset C Adds on RTX 40
The test offers a useful data point for RTX 40-series owners, since early independent testing discussed in the source had focused on RTX 50-series cards. It suggests Preset C can deliver a modest additional frame-rate improvement on an Ada Lovelace GPU, while retaining the basic benefit of generated frames. The measured gain was smaller than Nvidia’s headline claim, but the claim and the test are not directly comparable.
That distinction matters for buyers and players deciding whether to enable the beta mode. Nvidia’s claim of up to 35% faster performance on an RTX 5060 refers to 6x frame generation, a mode exclusive to Blackwell GPUs. The RTX 4070 Ti Super cannot use 6x generation; the XDA test used the 2x mode. Nvidia’s chart showed a smaller gain for the RTX 5060 at 2x, and the test’s hardware, CPU and graphics settings also differed from Nvidia’s setup.
For players who want extra displayed frames, Preset C may be worth testing in supported games. Those who prioritize image quality can stay with Preset B, particularly if they notice artifacts in text, particles or interface elements. The results do not establish how often such artifacts appear across other titles.
Products Worth Considering
LG UltraGear 27-Inch QHD OLED Gaming Monitor, 240Hz, 0.03ms, G-SYNC Compatible, FreeSync Premium Pro, HDMI 2.1
LG UltraGear 32GX850A-B 32-Inch 4K UHD Glossy OLED Gaming Monitor
Samsung 27-Inch Odyssey QD-OLED G8 4K 240Hz Gaming Monitor
As an affiliate, we earn on qualifying purchases.
How the Two Presets Differ
Nvidia’s October 13 announcement introduced Preset C for RTX 40- and 50-series GPUs through the Nvidia App. The announcement described the mode briefly and included a benchmark chart, leaving open how its performance and image-quality trade-offs would translate to Ada Lovelace cards. Preset B is Nvidia’s existing quality-oriented mode; Preset C uses the lighter replacement model.
Nvidia’s cited performance example used an RTX 5060 paired with a Ryzen 7 9800X3D. XDA instead tested an RTX 4070 Ti Super with a Ryzen 5 7600X and 32GB of DDR5-6000 memory, using driver version 621.01. Its three-run averages make the comparison between Preset B and C meaningful for that test system, but the hardware and settings differences prevent treating the result as a direct replication of Nvidia’s chart.
Separately, Digital Foundry had tested Preset C on RTX 50-series hardware. The source says its reviewers reported weaker handling of text and particles, particularly when inspecting footage frame by frame. That observation does not establish that all users will see the same artifacts during normal play.
“Preset C runs up to 35% faster on the RTX 5060, with minor image quality trade-offs.”
— Nvidia
Where the Test Has Limits
The 6.1% performance increase is an average from three benchmark runs in Cyberpunk 2077 on one RTX 4070 Ti Super system. The source does not establish whether the same gain would appear in other games, at different resolutions, with different CPUs or under different graphics settings. It also does not provide a broader test across multiple RTX 40-series cards.
The reviewer could not distinguish Preset B and Preset C during the gameplay test, but that does not rule out visible differences in other scenes or to other players. Nvidia describes a quality trade-off, and Digital Foundry’s reported findings on RTX 50-series hardware indicate that text and particles can show differences under close inspection. How often those artifacts occur in routine play remains unclear.
Nvidia’s up-to-35% figure should not be read as the expected gain for RTX 40-series owners: it comes from an RTX 5060 using 6x frame generation. The available evidence here does not show whether Preset C’s benefits or visual compromises vary consistently among individual RTX 40-series models.
More RTX 40 Testing Needed
The immediate next step for owners is to try Preset C in the games they play and compare it with Preset B, since the reported result is specific to Cyberpunk 2077 and one system. Players can focus on interface text, particles and ray-traced effects as well as average frame rate when deciding which preset suits them.
Further testing across more RTX 40-series GPUs and games would help show whether the 6.1% gain is typical and whether image artifacts vary by title. Nvidia’s announcement, as described in the source, does not establish a schedule for additional results or changes to the beta mode. Until broader data is available, Preset C is best treated as an option to test rather than a guaranteed upgrade for every RTX 40-series owner.
Key Questions
What is Nvidia DLSS Frame Generation Preset C?
Preset C is a beta frame-generation mode available through the Nvidia App for RTX 40- and RTX 50-series GPUs. Nvidia says it swaps one of frame generation’s AI models for a lighter algorithm to improve performance, with some image-quality trade-offs.
How much faster was Preset C on the RTX 4070 Ti Super?
In XDA Developers’ three-run Cyberpunk 2077 test, average performance rose from 157.6 FPS with Preset B to 167.2 FPS with Preset C, a 6.1% increase on that test system.
Does the 35% Nvidia performance claim apply to RTX 40-series cards?
That claim was for an RTX 5060 using 6x frame generation, which is exclusive to Blackwell GPUs. It is not a measured result for the RTX 4070 Ti Super or a general RTX 40-series performance claim.
Did the test find a visible image-quality difference?
The reviewer said they could not distinguish Preset C from Preset B during about an hour of gameplay. That finding is limited to the test conditions; Nvidia describes minor quality trade-offs, and Digital Foundry reportedly observed text and particle differences when examining RTX 50-series footage closely.
Should RTX 40-series owners use Preset C?
The test suggests it may provide a modest frame-rate gain in Cyberpunk 2077, but results may differ by game and system. Owners can compare it with Preset B and choose based on their own performance and image-quality preferences.
Source: XDA Developers
